https://www.shakuntlascientifictraders.co.in Latest Products Thu, 12 Mar 2026 07:57:48 +0530 en-us https://www.shakuntlascientifictraders.co.in https://www.shakuntlascientifictraders.co.in/1-14410-0001-silica-test-kit.htm https://www.shakuntlascientifictraders.co.in/1-14410-0001-silica-test-kit.htm Fri, 11 Apr 2025 00:00:00 +0530 Product identifiers Product name : Silicate (Silicic Acid) Test Method: colorimetric with color card and comparator block with long test tubes 0.01-0.02-0.04- 0.06-0.08-0.10-0.15-0.20-0.25 mg/l Si 0.02-0.04-0.09-0.13-0.17-0.21-0.32-0.43- 0.53 mg/l SiO₂ MColortest™ Product Number : 1.14410 Catalogue No. : 1.14410.0001 BRand : Millipore REACH No. : This product is a mixture. REACH Registration Number see section 3.  https://www.shakuntlascientifictraders.co.in/silica-test-kit.htm https://www.shakuntlascientifictraders.co.in/silica-test-kit.htm Fri, 11 Apr 2025 00:00:00 +0530 Method Determination with color-disk comparator In sulfuric solution silicate ions react with molybdate ions to form a yellow heteropoly acid. This is reduced to silicomolybdenum blue. The silicate concentration is measured semiquantitatively by visual comparison of the color of the measurement solution with the color fields of a color disk. 2. Measuring range and number of determinations Measuring range / color-scale Number of graduation 1) determinations 0.3 - 0.6 - 1.0 - 1.5 - 2 - 3 - 5 - 7 - 10 mg/l Si 150 0.64 - 1.3 - 2.1 - 3.2 - 4.3 - 6.4 - 11 - 15 - 21 mg/l SiO2 1) for conversion factors see section 8 3. Applications Sample material: Groundwater, surface water, and seawater Drinking water and mineral water Industrial and process water Boiler water and boiler feed water Wastewater and percolating water 4. Influence of foreign substances This was checked individually in solutions containing 5 and 0 mg/l Si. The determination is not yet interfered with up to the concentrations of foreign substances given in the table. Cumulative effects were not checked; such effects can, however, not be excluded. Concentrations of foreign substances in mg/l or % AsO43- 1 Mg2+ 1000 Surfactants 1) 100 Ca2+ 1000 Mn2+ 10 Na-acetate 10 % Cd2 + 1000 NH4+ 1000 NaCl 5 % Cr3 + 100 Ni2+ 1000 NaNO3 10 % Cr2O72- 100 NO2- 1000 Na2SO4 5 % Cu2+ 10 Pb2+ 10 Fe3+ 10 PO43- 50 Hg2+ 100 Zn2+ 100 1) tested with nonionic, cationic, and anionic surfactants 5. Reagents and auxiliaries Please note the warnings on the packaging materials! The test reagents are stable up to the date stated on the pack when stored closed at +15 to +25 °C. Package contents: 1 bottle of reagent Si-1 1 bottle of reagent Si-2 3 bottles of reagent Si-3 1 graduated 6-ml plastic syringe 2 test tubes with screw caps 1 color-disk comparator Other reagents and accessories: MQuant® Universal indicator strips pH 0 - 14, Cat. No. 1.09535 Sodium hydroxide solution 1 mol/l Titripur® (approx. 4 %), Cat. No. 1.09137 Sulfuric acid 0.5 mol/l Titripur®, Cat. No. 1.09072 MQuant® pH-indicator strips pH 0 - 6.0, Cat. No. 1.09531 Silicon standard solution Certipur®, 1000 mg/l Si, Cat. No. 1.70236 MQuant® Flat-bottomed tubes with screw caps for MQuant® tests with color disk comparator (12 pcs), Cat. No. 1.17988 Refill pack: Cat. No. 1.18323 Silicate (Silicic Acid) Test Refill pack for 1.14792 and 1.14410 (Reagents without technical accessories for the number of determinations stated in section 2) 6. Preparation • Analyze immediately after sampling. • The pH must be within the range 2 - 8. Adjust, if necessary, with sodium hydroxide solution or sulfuric acid. • Filter strongly turbid samples. 7. Procedure Measurement Blank sample right-hand tube (A) left-hand tube (B) behind the color behind the color disk disk Pretreated 6 ml 6 ml Inject into the test sample tube with the (20 - 40 °C) syringe. Reagent Si-1 3 drops 1) - Add, close the tube, and mix. The pH must be within the range 1.2 - 1.6. Check with MQuant® pH-indi- cator strips. Adjust the pH, if necessary, with reagent Si-1. Leave to stand for 3 min (reaction time 1). Reagent Si-2 3 drops 1) - Add, close the tube, and mix. Reagent Si-3 10 drops 1) - Add, close the tube, and mix. Leave to stand for 2 min (reaction time 2). Hold the comparator to the light, keeping it upright, and rotate the disk until the closest possible color match is achieved between the two large windows. Read off the result in mg/l Si shown in the small window. 1) Hold the bottle vertically while adding the reagent! Notes on the measurement: • The color of the measurement solution remains stable for at least 60 min after the end of the reaction time 2 stated above. • Turbidity in the measurement solution makes the color comparison more difficult. • If the color of the measurement solution is equal to or more intense than the darkest color on the scale, repeat the measurement using fresh, diluted samples until a value of less than 10 mg/l Si is obtained. Concerning the result of the a https://www.shakuntlascientifictraders.co.in/digital-bursting-strength-tester.htm https://www.shakuntlascientifictraders.co.in/digital-bursting-strength-tester.htm Thu, 24 Jul 2025 00:00:00 +0530 Digital Bursting Strength Tester Suitable for Paper Board etc with Printer Facility.  Type: Manual Clamping  Weight: 55 Kg Model: Printer Digital Type Pressure Range: 0-35 Kg/cm2 Accuracy: 0.1 Power: 220 V, AC Test Fluid: Glycrine Capacity: 0-7 kg/cm2 & 0-35 kg/cm2 Bursting Capacity: 0-7 kg/cm2 for Paper & 0-35 kg/cm2 for Board Material: S.S. & M.S. Lease Count: 0.1 Range: 0-35 kg/cm2 Voltage: 220 V Frequency: 50 Hz Grade: A1 Display Type: Digital https://www.shakuntlascientifictraders.co.in/digital-moisture-analyzer.htm https://www.shakuntlascientifictraders.co.in/digital-moisture-analyzer.htm Thu, 15 May 2025 00:00:00 +0530 Digital Moisture Analyzer with 5" Touch Screen Display Buit in Speaker Max Weight - 120Gms Readability 1mg Accuracy- +-5% (Sample > 3g) Temp. Range 50 to 180D C Temp. Accuracy - +-1DC Heating Time Setting - 0-99 Minute Drying Program - Standard Fast Soft Stop Mode - Automatic  Power Supplu  220V Ac Interface - USB Rs232 Buit in Database can store 100 moisture data, 100 Sample Data and built in sample data Suitable for Plastic granuals also    https://www.shakuntlascientifictraders.co.in/elcometer-456-coating-thickness-gauge.htm https://www.shakuntlascientifictraders.co.in/elcometer-456-coating-thickness-gauge.htm Fri, 11 Apr 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/flow-cup-viscometer.htm https://www.shakuntlascientifictraders.co.in/flow-cup-viscometer.htm Fri, 11 Apr 2025 00:00:00 +0530 FORD CUP / FLOW CUP VISCOMETER B4 AS PER IS 101 3944 B4 CUP  COMPLETE WITH STAND  https://www.shakuntlascientifictraders.co.in/pencil-hardness-tester.htm https://www.shakuntlascientifictraders.co.in/pencil-hardness-tester.htm Tue, 13 May 2025 00:00:00 +0530 Pencil Hardness Tester  With Load Weights 1000g / 750 g/ 500g Measurement Angle - 45D With Pencils 13 (6B - 6H) Eraser, Knife, Horizonal Pad Block   https://www.shakuntlascientifictraders.co.in/laboratory-hot-plate.htm https://www.shakuntlascientifictraders.co.in/laboratory-hot-plate.htm Fri, 11 Apr 2025 00:00:00 +0530 MOC (Body) : Thick P.C.R.C. Sheet duly powder coated MOC (Top Platform) : MS / SS 304 Controller: Energy Regulator/Thermostat/ PID Controller Accuracy: ±5C (Thermostat) / ±1C (PID Controller) Heating Elements : Placed underneath for uniform heating duly insulated Temperature Range : Continuous Heating Upto 350⁰C Power Consumption: 1.2/1.5/ 2 / 3 KW Electric Supply : 220/230V AC, 50/60 Hz https://www.shakuntlascientifictraders.co.in/portable-hand-held-refractometer.htm https://www.shakuntlascientifictraders.co.in/portable-hand-held-refractometer.htm Fri, 11 Apr 2025 00:00:00 +0530 HAND REFRACTOMETER ERMA TYPE  Brix Refractometer  0-32% 28-62% 45-82% 58 - 90% 0-55% https://www.shakuntlascientifictraders.co.in/gloss-meter-tester.htm https://www.shakuntlascientifictraders.co.in/gloss-meter-tester.htm Tue, 13 May 2025 00:00:00 +0530 3nh Gloss Reflactance Meter with 60D Angle Head Measuring Range 0-200 GU Model YG60S Economic Series 3nh Gloss Reflactance Meter with 60D Angle Head Measuring Range 0-1000GU Model YG60 3nh Gloss Reflactance Meter with Tripple Angle Head With 20/60/85D  https://www.shakuntlascientifictraders.co.in/muffle-furnaces.htm https://www.shakuntlascientifictraders.co.in/muffle-furnaces.htm Fri, 11 Apr 2025 00:00:00 +0530   Light Weight with fiber ceramic wool insulation. The Order casing is made of Double Walled Mild Steel Sheet Duly powder coated. Heating element is made of Kanthal Wire Backed by cerawool insulation. Dual Shell Housing for low external or skin temperature For human safety & high stability. Two Separate paths are provided. One for Fresh air path Backed by blower which is utilized for minimize skin temperature and second for working Area fumes. A viewing cap is also provided on the door. Temp. Controlled by PID Microprocessor controller dual display with safety alarm with an accuracy of ± 1DC. To work on 220/230 Volt Ac. Working Chamber Sizes are as below 4 x 4 x 9" 5 x 5 x 10" 6 x 6 x 12" 8 x 8 x 12" Temp. Range - 950° or  1100D Controlled by PID Temp. Controller.  https://www.shakuntlascientifictraders.co.in/hegman-fineness-grinding-gauge.htm https://www.shakuntlascientifictraders.co.in/hegman-fineness-grinding-gauge.htm Fri, 11 Apr 2025 00:00:00 +0530 HEGMAN GAUGE AS PER IS 101 WITH SCRAPPER. Range- 0-10 microns Range- 0- 25 microns Range- 0-50 microns Range- 0-100 microns https://www.shakuntlascientifictraders.co.in/yg268-tri-angle-gloss-meter.htm https://www.shakuntlascientifictraders.co.in/yg268-tri-angle-gloss-meter.htm Sun, 25 Jan 2026 00:00:00 +0530 3NH SINGLE ANGLE HEAD GLOSS METER MODEL YG60S COMES WITH 60  https://www.shakuntlascientifictraders.co.in/gm-247-gloss-surface-reflection-tester-meter.htm https://www.shakuntlascientifictraders.co.in/gm-247-gloss-surface-reflection-tester-meter.htm Tue, 13 May 2025 00:00:00 +0530 PAPER GLOSS METER WITH MEASURING HEAD 20 / 45 / 75D WITH 4 DIGIT BACKLIGHT LCD MEASURING RANGE - 0.1-200 GU REPEATABILITY - +_0.5GU https://www.shakuntlascientifictraders.co.in/laboratory-jaw-crusher.htm https://www.shakuntlascientifictraders.co.in/laboratory-jaw-crusher.htm Fri, 11 Apr 2025 00:00:00 +0530 Laboralory Jaw Crusher is designed for fast crushing of aggergates. ores. minerals,coal, coke' chemicals and other sirnilar maierials lt is compact and of rugged construclion for genera! laboratory or small pitot plant operations. Two Jaws of manganese steel are provided in this laboratory Jayy Crusher. The msveable Jaw produces trrvo blows for every revolulion' thus reducing oversizin! to a minimum. A cornbination ol forward and downward strokes with a rocking action exerts pressute on the ooarser malenal,yel permits the finished material to pass through the Jaws. A hopper is provided at the top for feeding material- The smooth Jaws ensure a uniforrn Product LABORATORY JAW CRUSHER Size- 4” x 6” Feed Size:- 25 to mm Discharge Size- 6mm to 20 mm With 3hp 3phase Motor. https://www.shakuntlascientifictraders.co.in/wensar-digital-analytical-balance.htm https://www.shakuntlascientifictraders.co.in/wensar-digital-analytical-balance.htm Fri, 11 Apr 2025 00:00:00 +0530 EMFC BASED  TOUCH SCREEN DISPLAY CAP. 220G READABILITY - 0.0001GM/0.1MG PAN SIZE - 90MM DIA INTERNAL CALIBRATION https://www.shakuntlascientifictraders.co.in/digital-conductivity-meter.htm https://www.shakuntlascientifictraders.co.in/digital-conductivity-meter.htm Thu, 15 Jan 2026 00:00:00 +0530 DIGITAL CONDUCTIVITY METER 3 1/2 DIGIT LEC DISPLAY RANGE - 5 RANGE 0-1000MHPS/CM  0-1000PPT ACCURACY - +_1% FS+_1 DIGIT TEMP. COMPENSATION -  MANUAL 0-50DC CELL CONSTANT ADJUSTMENT- ADJUSTABLE DIGITAL DISPLAY CONDUCTIVITY / TDS CELL - DIP TYPE POWER 220 +_10% 50HZ https://www.shakuntlascientifictraders.co.in/three-angle-gloss-meter.htm https://www.shakuntlascientifictraders.co.in/three-angle-gloss-meter.htm Tue, 13 May 2025 00:00:00 +0530 ELCOAT TRIPPLE ANGLE GLOSS METER  WITH 20 / 60 / 85 0-2000gu @ 20D 0-1000GU @ 60D 0-160 GU @ 85D https://www.shakuntlascientifictraders.co.in/analyzer-equipment.htm https://www.shakuntlascientifictraders.co.in/analyzer-equipment.htm Fri, 11 Apr 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/high-temperature-hot-air-oven.htm https://www.shakuntlascientifictraders.co.in/high-temperature-hot-air-oven.htm Fri, 11 Apr 2025 00:00:00 +0530 Usable Chamber (mm): 310W x 490D x 310H, Temp. Range UPTO 400D Temperature range: 50 Degree. to 400 dig.C Heat Load: 2.0 kw,230VAC, Temperature Control: Digital Controller. Air circulation : Natural Convection One Year Warranty On Site. https://www.shakuntlascientifictraders.co.in/cross-hatch-cutter-kit.htm https://www.shakuntlascientifictraders.co.in/cross-hatch-cutter-kit.htm Fri, 11 Apr 2025 00:00:00 +0530 Cross hatch cutter is designed and manufactured in accordance with ISO is also complies with GB/T9286-98 standard. The instrument is mainly used for the measurement of the grid scratching adhesion of the organic paints. It is not only applicable to the laboratories, but also good to the construction sites under various conditions. There are three specifications of multi-blade cutters (1mm, 2mm, and 3mm), which can be closed for different test conditions. The multi-blade cutter with 1mm distance is suitable to the test pieces with the paint film less than 60um. The multi-blade cutter with 2mm distance is suitable to the test pieces with the paint film of 60-100um Introduction: 2202 Cross Hatch Cutter is designed and manufactured according to ISO 2409-1992, GB/T9286-98, BS 3900 E6 and ASTM D3359 standards.   https://www.shakuntlascientifictraders.co.in/automatic-scratch-hardness-tester.htm https://www.shakuntlascientifictraders.co.in/automatic-scratch-hardness-tester.htm Fri, 11 Apr 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/digital-coating-thickness-gauge.htm https://www.shakuntlascientifictraders.co.in/digital-coating-thickness-gauge.htm Fri, 11 Apr 2025 00:00:00 +0530 ACCU456B Gauge (Ready to Use), 2 x Calibration Checkpieces (Aluminium and Steel) & 5 x Thickness Check Foils  Technology - Magnetic Induction - (enables measurement of non magnetic coatings on magnetic substrates such as Steel, Mild Steel, Cast Iron &Magnetic Stainless Steel). Example coatings:- Paint,Zinc / Galvanising, Chrome, Copper, Enamel, Rubber, Paint, Varnish, Powder Coating, Plastic etc Non Ferrous Metal Mode (NFe) (Typical Applications) Technology - Eddy Current - (enables measurement of non-conductive coatings on non-ferrous substrates such as Aluminium, Copper, Brass, Zinc, Tin, and NonMagnetic Stainless Steel). Example coatings:- Paint,Enamel, Rubber, Paint, Varnish, Powder Coating,Anodizing, Plastic etc Measuring Range 0-1500µm (0-1.5mm) or 0-60mil Resolution 0.1µm (0-99.9 µm) and 1µm (over 100 µm) Accuracy ±1+3% H (H:coating thickness) Power Supply 2 x 1.5V AAA Batteries Minimum Measurement Area 5mm Minimum Sample Thickness 0.4mm Operating Conditions Temp: 0 - 40ºC and Humidity: 10-85%RH https://www.shakuntlascientifictraders.co.in/p254-paint-adhesion-testing-tape.htm https://www.shakuntlascientifictraders.co.in/p254-paint-adhesion-testing-tape.htm Fri, 11 Apr 2025 00:00:00 +0530 P254 is a 0.05 mm polyester film tape coated uniformly with thermosetting rubber adhesive on one side. Features Class B insulation  Resistant to chemicals  High tensile strength Dimensions: a) Length (m) – (+)0.5 / (-)0.0 b) Width (mm) - As required (±) 0.5 Suggested Applications • For insulation of low to medium voltage coils in Switchgear, Transformers and Motors • Insulation and holding of leads from magneto coil • Used for reinforcement and patchwork of main insulation in small dry type transformers • For cross hatch paint peel testing as per ASTM D3359 *However, several factors contribute to the adhesion of the paint to the surface hence no single tape is likely to be suitable for testing all coatings. Tape test serves only as an indicator that some minimum value for bond strength is met or exceeding.    https://www.shakuntlascientifictraders.co.in/heating-mantles.htm https://www.shakuntlascientifictraders.co.in/heating-mantles.htm Fri, 11 Apr 2025 00:00:00 +0530 Electric heating net is hand knitted form glass yarn to attain Temp. Upto 300’C. The body of the mantle is one piece from non-rusting Aluminium These are lagged with special created mineral wool provided with ON/OFF switch and pilot lamp. Temperature-Ambient to 350 degree celcius. Supplied complete with cord & plug to work on Single Phase 220 / 230 volts A.C. supply. https://www.shakuntlascientifictraders.co.in/tubular-impact-tester.htm https://www.shakuntlascientifictraders.co.in/tubular-impact-tester.htm Fri, 11 Apr 2025 00:00:00 +0530 TUBULAR IMPACT TESTER WITH 4LBS The Instrument consists of a solid M. S. Powder coated base stand with a guide tube made of aluminum duly powder coated having graduation in inches up to 40” and in cm up to 102 cm. Indenter Ball Dia -15.9mm In accordance with IS 101, BS-6496 & ASTM D2794 Standards for testing the resistance of applied paints to Impact (to test the flexibility of Paints.) https://www.shakuntlascientifictraders.co.in/stainless-steel-density-cup.htm https://www.shakuntlascientifictraders.co.in/stainless-steel-density-cup.htm Thu, 15 May 2025 00:00:00 +0530 Density is weight per unit volume. It is a key property in the identification, characterization, and quality control of a wide range of materials. Density measurements in terms of weight per gallon are commonly used to check paint quality. If the density is not within specification, there is a good chance that there was a mischarge or other serious problem. https://www.shakuntlascientifictraders.co.in/digital-tablet-hardness-tester.htm https://www.shakuntlascientifictraders.co.in/digital-tablet-hardness-tester.htm Fri, 11 Apr 2025 00:00:00 +0530 Material MS Country of Origin Made in India Measurable units N, KGF, Lbf. Hardness range 5 to 500N Tablet Size 2 mm to 28 mm Accuracy 0.5% Full Scale Portable Tablet Hardness Tester A compact size and high accuracy instrument to measure the tablet Hardness with LCD backlit display showing hardness range 5 to 500N, having measurable units i.e. N, KGF, Lbf. External RS-232 printer attachment facility available. https://www.shakuntlascientifictraders.co.in/bgd-503-rular-cross-hatch-cutter.htm https://www.shakuntlascientifictraders.co.in/bgd-503-rular-cross-hatch-cutter.htm Sat, 11 Oct 2025 00:00:00 +0530  Product descriptions from the supplier BGD 503 Cross Cutting Rule Tester Cutting Testing Machine ISO2409 BS3962 Adhesion scratch boardDescription BGD 503 Cross Cutting Rule is used to test the adhesion of film with substrate(the thickness of  dry film less than 250μm).It confirms to ISO 2409:(2013)and BS 3962-6 Standard   BGD 503 Cross Cutting Rule Tester Cutting Testing Machine ISO2409 BS3962 Adhesion scratch board Main Technical Parameters Cutting Distance:1mm,1.5mm,2mm,3mm Cutting Length:35mm Cutting Number:11 teeth for each  .Single-blade Cutter:With V shape cutting edge(15°~30°),blade thickness 0.43mm±0.03mm Ordering Information: BGD 503---Cross Cutting Rule BGD 1280---Cutter Blade(pack of 10)     Key attributes   Other attributes customized support OEM, ODM, OBM place of origin Guangdong, China             model number BGD 503 Packaging and delivery Selling Units: Single item Single package size: 12X6X3 cm Single gross weight: 1.000 kg https://www.shakuntlascientifictraders.co.in/shimadzu-moisture-analyzers.htm https://www.shakuntlascientifictraders.co.in/shimadzu-moisture-analyzers.htm Thu, 24 Jul 2025 00:00:00 +0530 Excellent performance for a wide variety of applications in multiple industries In many fields, a moisture analyzer is a necessary tool for quality control requirements. With the MOC63u, you can easily obtain accurate data. Simply place material on the pan and shut the cover. The MOC63u will start to measure. The MOC63u adapts to various materials and increases your work efficiency. Halogen heater Long-life and high power halogen heater provides quick and accurate measurement. The temperature can be changed from 50 degrees to 200 degree Celsius. You can check sample status from window while measurement. Large pan size: 95mm dia  MOC63u has large pwn. (95mm diameter) It can provide quick and accurate measurement to spread sample in thin layer on the pan. Data management and easy operation Built-in USB port The measure results can be transferred by USB cable. If connect with PC by USB, needs USB driver. https://www.shakuntlascientifictraders.co.in/mettler-moisture-analyzer.htm https://www.shakuntlascientifictraders.co.in/mettler-moisture-analyzer.htm Thu, 15 Jan 2026 00:00:00 +0530 Halogen Moisture Analyzer HE53 (230V) Great for Simple Moisture Analysis.0.01 %MC (1 mg) readability, bright backlit LCD display, progress indicator, one method, robust and compact design, 50-160° drying temperature. Reliable Moisture Results A straightforward instrument with all the basic functions you need for fast and efficient moisture measurements. Simple 3-Step Operation 1. Tare the empty sample pan. 2. Place the sample. 3. Close the lid and start. Moisture analysis couldn't be easier. Affordable Quality With its simple high quality construction and rugged design, this instrument is suitable for both laboratory and production environments. https://www.shakuntlascientifictraders.co.in/wensar-moisture-analyzer.htm https://www.shakuntlascientifictraders.co.in/wensar-moisture-analyzer.htm Thu, 24 Jul 2025 00:00:00 +0530 WENSAR DIGITAL MOISTURE ANALYZER https://www.shakuntlascientifictraders.co.in/infrared-moisture-balance.htm https://www.shakuntlascientifictraders.co.in/infrared-moisture-balance.htm Tue, 13 May 2025 00:00:00 +0530 INFRARED MOISTURE BALANCE WITH INBUILT DIGITAL P.I.D TEMP. CONTROLLER WITH DOUBLE DISPLAY i.e. SET TEMP. & ACTUAL TEMP. & WITH HEAVY DUTY SOLID STATE RELAY & PT 100 "L" TYPE S.S. THERMOCOUPLE. (SUPPLIED WITH PHILIPHS LAMP). Technical specifications:- Capacity – Infrared Moisture Balance is available as 5 Grams Standard Instrument (5 Grams Torsion Wire). However the instrument is also available in capacity 10, 20 and 25 Grams upon request against order specifications. Scale Range: - 0-100%. Lease Count: - 0.2% Probable Error: - ± 0.25% in Substances containing moisture up to 25% and ± 0.5% on sample containing moisture above 25%. Input Voltage:- 220 Volt (AC), 50 HZ. SUPPLIED WITH PHILIPHS LAMP. https://www.shakuntlascientifictraders.co.in/conical-mandrel-tester.htm https://www.shakuntlascientifictraders.co.in/conical-mandrel-tester.htm Fri, 11 Apr 2025 00:00:00 +0530 Conical Mandrel The Tester is a mechanical tester used to determine the effects of bending on the elasticity, adhesion and elongation properties of cured coatings on sheet metal. The frame has a bending lever with a roller 200 mm length which pivots on a steel conical mandrel with a diameter from 4 – 38 mm. A graduation indicates the mandrel diameter in both mm and inches. The specimen can be bent on part of, or along, the entire length of the mandrel, and the results (cracks) corresponding to different test diameters can be observed in a single operation. This is ideal for use in conjunction with the cylindrical mandrel, as it identifies the stop point for more focused testing https://www.shakuntlascientifictraders.co.in/leak-test-apparatus.htm https://www.shakuntlascientifictraders.co.in/leak-test-apparatus.htm Fri, 11 Apr 2025 00:00:00 +0530 Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccators and huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. Providing two electronic timers, one of which control the vacuum and second timer is used for calculating the test time https://www.shakuntlascientifictraders.co.in/paint-testing-equipment.htm https://www.shakuntlascientifictraders.co.in/paint-testing-equipment.htm Fri, 11 Apr 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/moisture-analyzer.htm https://www.shakuntlascientifictraders.co.in/moisture-analyzer.htm Fri, 11 Apr 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/cl54-digital-ph-meter.htm https://www.shakuntlascientifictraders.co.in/cl54-digital-ph-meter.htm Sat, 11 Oct 2025 00:00:00 +0530 Digital Ph Meter 0-14.00pH, +_1999mV Accuracy +_0.01 pH +_ Digit +_ mV +_ Digit Resolution pH: 0.01 pH, mV: 1mV Impendance 10/12 ohms Temp. Compensation 0-100D C Manual or 0-130D C Display 3 1/2 Digit 0.5" Red LED  for pH and Temp.  Dimension 225(W) x 60(H) x 150 (D)mm Supplied with :- ph Electrode, Buffer Capsule of pH 7& pH4 Electrode Stand Dust Cover https://www.shakuntlascientifictraders.co.in/gls-09-digital-gloss-meter.htm https://www.shakuntlascientifictraders.co.in/gls-09-digital-gloss-meter.htm Thu, 15 May 2025 00:00:00 +0530 METRIX DIGITAL GLOSS  REFLACTANCE METER Features: Simple calibration.  Memory storage and recall.  Single and continuous measuring modes.  Backlit LCD display  Optional PC interface  Applications: The glossmeter is used in many industries from paper mills to automotive and are used by the producer and the user alike. Few examples include Paints & coatings, additives, inks, plastics, aerospace, automotive manufacture and re-finish, etc.  Measuring Principle: Gloss Meter is used to measure the specular reflection (gloss) of a surface. Gloss is determined by projecting a beam of light at a fixed intensity and angle onto a surface and measuring the amount of reflected light at an equal but opposite angle. https://www.shakuntlascientifictraders.co.in/hanna-digital-ph-meters.htm https://www.shakuntlascientifictraders.co.in/hanna-digital-ph-meters.htm Fri, 11 Apr 2025 00:00:00 +0530 HANNA DIGITAL PEN TYPE PH METER Waterproof Pocket pH Tester with 0.1 Resolution - pHep® The HI98107 pHep® is an easy-to-use pH water tester that makes monitoring water quality simple. This accurate pH tester features 0.1 resolution with automatic two-point calibration and temperature compensation in a single, portable, pocket device. Compact design fits right in your pocket so you can take it anywhere. Cloth junction providing a larger surface area than a standard ceramic junction   Great for drinking water, aquariums, pools, & ponds. RANGE 0.0 TO 14.0 pH 0.0 to 50.0DC (32.0 to 122.0DF) Resolution 0.1pH/0.1Dc/+_1.0DF Calibration - automatic, one or two points (ph 4.01, 7.01, 10.01) Automatic Temp. Compensation - 0-50Dc weight 65g https://www.shakuntlascientifictraders.co.in/labman-1mv-digital-ph-meter.htm https://www.shakuntlascientifictraders.co.in/labman-1mv-digital-ph-meter.htm Thu, 15 May 2025 00:00:00 +0530 LABMAN PH METER MODEL LMPH-10H  https://www.shakuntlascientifictraders.co.in/sieve-shaker.htm https://www.shakuntlascientifictraders.co.in/sieve-shaker.htm Fri, 11 Apr 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/ph-meter.htm https://www.shakuntlascientifictraders.co.in/ph-meter.htm Fri, 11 Apr 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/polished-sieve-shaker.htm https://www.shakuntlascientifictraders.co.in/polished-sieve-shaker.htm Tue, 13 May 2025 00:00:00 +0530 TABLE TOP MOTORIZED SIEVE SHAKER. Suitable for 8” Dia Sieves. With Programmable Timer 0-999 Minute Power Supply – 220V AC. https://www.shakuntlascientifictraders.co.in/gyratory-sieve-shaker.htm https://www.shakuntlascientifictraders.co.in/gyratory-sieve-shaker.htm Fri, 11 Apr 2025 00:00:00 +0530 This can take upto 7 sieves of 200 mm diameter. To Accommodate 300mm-450mm diameter sieves, Lid & Pan and adapter can be supplied in extra cost. The Sieve Table is inclined to the vertical axis and the direction of inclination changes a clock wise direction. In addition to the grytory motion 15 RPM of the table. there is and upward and downward movement of tapping is 188 per min. ensuring that each square centimeter of the sieve is utilized. The whole gear mechanism runs in grease because it fill with grease. Supplied without Sieves Lid & Receiver.Operation on: 1/4 HP Motor, 220/230V. Single phase 50 Hz main AC.for 18" Adaptper use 1/2 hp Motor 220/230V. 50 Hz main ACOn Request:-Half Covered & Full Covered Body with german timer 60min.Warning:- Fill Grease After 6 Months. https://www.shakuntlascientifictraders.co.in/rotap-sieve-shaker.htm https://www.shakuntlascientifictraders.co.in/rotap-sieve-shaker.htm Fri, 11 Apr 2025 00:00:00 +0530 ASTM Model has model revolution is 280-290 per minute. It has upward and downward hammering is 150-160 stock per minute.The Rotap Sieve Shaker reproduces the circular and tapping motion of hand sieving and provides a uniform mechanical action, ensuring accurate, dependable and precisely repeatable result. It can take upto 5 Sieves LID and PAN of 150mm or 200 mm diameter. The Whole gear mechanisum runs in a oil bath.Supplied without sieves and Lid and ReceiverOperation:- 1/4 hp Fluch Type Motor220/230V 50Hz single phase main AC. Warning :- Fill 40 Number Sarvo Mobileoil upto level before use.  https://www.shakuntlascientifictraders.co.in/laboratory-pulverizer.htm https://www.shakuntlascientifictraders.co.in/laboratory-pulverizer.htm Fri, 11 Apr 2025 00:00:00 +0530 Laboratory Pulverizer is a disc type grinder, designed to grind virtually any material to produce a fine mesh sample in one operation. It is a self contained grinder, with a rotary disc, having a planetary movement in a vertical plane.'Grinding is done between two discs-one stationary and the other revolving eccentrically at high speed. the Disc are made from heat treated alloy steel.With the help of a convenient hand wheel, the size of the final product can be adjusted. This can be done, even while the machine is in operation. A self locking device holds the hinged grinding chamber in place and affords easy and quick access to it, for removel of ground samples and for cleaning. The pulverizer has a capacity of reducing about half of a kilogram of a quarts type sample to 72 mesh in about a minute. The pulverizer is fitted with 3hp motor, a "V" beltPully drive and mounting.Disc Diameter :- 175mmMaximum Feed Size- 6mmYield- 250gsm/min.Size of Finished - 72 mesh,   https://www.shakuntlascientifictraders.co.in/mohs-hardness-test-kit.htm https://www.shakuntlascientifictraders.co.in/mohs-hardness-test-kit.htm Fri, 11 Apr 2025 00:00:00 +0530 MOHS HARDNESS TEST KIT - (BS 6431-13, EN ISO 10545-14) HSN : 90248090 This set includes 8 Mohs' Hardness Points from Mohs' 2 through Mohs' 9, nicely mounted in nickel-plated Brass, color-coded, number-stamped, double-ended Pin Vises. Also includes two Hardness Plates of Mohs' 3.5 and 5.5, a 100x Sharpening Stone, along with laminated Instructions permanently affixed to inside of case, a Table of Industrial and other materials sorted by Mohs' Hardness, all compactly packaged in a molded Plastic carrying Case, designed for use in rugged workplace environments. https://www.shakuntlascientifictraders.co.in/ohaus-mb120-moisture-analyzer.htm https://www.shakuntlascientifictraders.co.in/ohaus-mb120-moisture-analyzer.htm Fri, 11 Apr 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/micro-processor-bomb-calorimeter.htm https://www.shakuntlascientifictraders.co.in/micro-processor-bomb-calorimeter.htm Tue, 13 May 2025 00:00:00 +0530 AUTOMATIC BOMB CALORIMETER MICROPROCESSOR BASED 20 X 4 LCD DISPLAY WITH KEYPAD ON FRONT PANNEL, AUTOMATIC CALCULATION & MEMORY STORAGE VIA USB INTERFACE IN PC. SUPPLIED WITH WATER JACKET WITH PUFF INSULATION, SAFETY DEVICE, SENSOR PROBE, HIGH PRESSURE FLEXIBLE TUBING SET & CERTIFIED BOMB. TEMP. RESOLUTION 0.001°C. https://www.shakuntlascientifictraders.co.in/brass-testing-sieve.htm https://www.shakuntlascientifictraders.co.in/brass-testing-sieve.htm Fri, 11 Apr 2025 00:00:00 +0530   Brass Frame Sieves are specialized laboratory tools used for the separation, classification, or filtration of materials based on their particle size. The sieve consists of a mesh screen, usually made from brass wire, attached to a sturdy frame. These sieves are commonly used in industries such as pharmaceuticals, food processing, chemical analysis, construction, and metallurgy for quality control, material testing, and other applications that require particle size analysis. https://www.shakuntlascientifictraders.co.in/scuff-tester.htm https://www.shakuntlascientifictraders.co.in/scuff-tester.htm Fri, 11 Apr 2025 00:00:00 +0530 SCUFF AND RUB TESTER https://www.shakuntlascientifictraders.co.in/cylindrical-mandrel-bend-tester.htm https://www.shakuntlascientifictraders.co.in/cylindrical-mandrel-bend-tester.htm Fri, 11 Apr 2025 00:00:00 +0530 The Cylindrical Mandrel Bend Test Apparatus is used to test the resistance of a coating of paint, varnish or related products to cracking and / or detachment from a metal substrate, when subjected to bending round a cylindrical mandrel. Stainless steel mandrels. Full range of mandrels -2mm to 32mm diameter. (1/8″ – 1” – ASTM-D522) Mandrels easily changed in seconds. Pre-drilled base, ready to secure to workbench. Following specifications can be complied with: BS EN ISO 1519 Type 2 and DIN53152 or ASTM D522 -Test method ‘B’ DESCRIPTION The instrument consists of a base plate, panel holder with clamp, a series of mandrels and the handle/bending mechanism. The base should be secured to a suitable work surface, allowing the operator to turn the handle smoothly during a test. The diameter of the mandrel to be used depends upon the test specifications. If a ‘point of failure’ test is carried out, successively smaller mandrels are used until a coating failure is observed.The panel holder accepts panels measuring up to 50mm (2″) wide, which are held firmly in place by the clamp. BS EN ISO 1501519 calls for panels of 50mm x 100mm, of a thickness of up to 1mm. The positions of the panel holder and the bending mechanism are adjustable, thereby ensuring that the panel is bent firmly around the surface of the mandrel.A nylon pad is fitted to the bending mechanism where it makes contact with the panel, to ensure the mechanism slides smoothly over the panel. METHOD OF USE1) Panels should be prepared in accordance with the appropriate specification.2) With the instrument secured to the bench, move the panel holder and bendingmechanism away from the mandrel hub.3) Insert the required mandrel.4) Lower the handle to a vertical position, then insert the test panel, painted side down, until approximately 40mm (1.6″) protrudes from the mandrel centreline toward the bending mechanism.5) Secure the panel using the clamp then adjust the holder so that the panel just touchesthe mandrel and adjust the bending mechanism so that it just touches the panel.6) Lift the handle smoothly through 180°, without jerking, over a period of 1 -2 seconds.7) Remove the panel and examine for signs of cracking and/or detachment from thesubstrate. If required, repeat the test with successively smaller mandrels until a failure isobserved. A accurate device to determine the cracking / flaking of paint or coating on a standard test metal panel on bending it through 180º on variable steel mandrels provided. Key provided is used for leveling purpose, to be used with mandrel. Mandrel Sizes Provided : 2mm, 3mm, , 4mm, 5mm, 6mm, 8mm, 10 mm, 12 mm, 16 mm, 20 mm, 25 mm and 32 mm. https://www.shakuntlascientifictraders.co.in/mild-steel-hard-grove-grindability-index-tester.htm https://www.shakuntlascientifictraders.co.in/mild-steel-hard-grove-grindability-index-tester.htm Sat, 11 Oct 2025 00:00:00 +0530 SCOPE : This International Standard specifies the method for determining the grindability index of hard coal using the Hardgrove machine. It also specifies the procedure for calibrating the test machine and for pre-paring the standard reference coal samples. DEFINITION : For the purposes of this International Standard, the following definition applies. Hard Coal : Coal having a gross calorific value of more than 24 MJ/kg on a moist, ash-free basis.  PRINCIPLE : This instrument can be used to test the coal grindability by Hardgrove method. Hardgrove Grindability Index Tester is a special tester for testing the grindability of soft coal and blind coal. Takes grinding law as the theoretical basis (The energy consumed in coal grinding in proportional to the new surface area of coal dust) Treatment of a prepared sample of coal of limited size range under defined conditions in a laboratory apparatus of standardized designed (calibrated Hardgrove machine). Derivation of the grindability index from sieve analysis of the ground product and by reference to a calibration chart prepared from standard reference material.   SIEVES : Test sieves, complying with the requirements of 16 mm, 4.75 mm, 2.36 mm, 1.18 mm, and 600 µm, 75 µm required as per ASTM D409 respectively. MECHANICALSIEVING MACHINE : Capable of accepting an assembly of vertically nested sieves. The machine shall be able to simulate the motions of hand sieving. This may be achieved by imparting a horizontal oscillatory motion of amplitude 25 mm to 30 mm at a frequency of approximately 300 min -1, whilst striking the top of the oscillating assembly with a mass of 1.9 kg, moving through a vertical distance of about 25 mm under the influence of gravity, at a frequency of approximately 150 blows per minute. Alternatively, the nest of sieves, cover and receiver may be vibrated by an electromagnetic device, pro-vided the sieving performance is equivalent to the mechanically vibrated machine described.   HARDGROVE GRINDABILITY MACHINE : Hardened iron or steel, with a horizontal track in which run eight steel balls, each of diameter 25, 4 mm. The balls shall be driven by an upper grinding ring rotated at 20 r/min ± 1 r/min. The upper grinding ring, which shall be of similar material to the bowl, shall be connected to a spindle and shall be driven by an electric motor through reduction gears. Aload shall be added to the spindle so that the total vertical force on the balls due to the top ring, gear, load and spindle is 284 N ± 2 N, i.e. closely equivalent to a total mass of 29 kg ± 0,2 Kg. The machine shall be fitted with a revolution counter and an automatic for stopping the machine after 60 ± 0,25 revolutions. PROCEDURE : Weigh a test portion of 50 g ± 0,01 g of the dedusted material, distribute it evenly in the grinding bowl and smooth the surface. Assemble the top grinding ring to the bowl and fasten the bowl in position to the driving spindle, making sure that the load is evenly applied. Present the counter and adjust the automatic stopping device so that the machine will operate for 60 ± 0,25 revolutions.           The Machine is Suitable for Laboratory Use for Coal Testing. It is complact with a sturdy base, plate support is provided with a bowl, centring shaft, Gear & Weight 29kg. +- 200gm. (cone & 8 Nos. Balls are common) with gear box and gear assembly. 8 Nos. Steel Balls 25 mm and preset counter are provided. The Machine is fitted with 1/4 hp Motor. Single Phase. The Main Shaft revoultion are 20 RPM +- 1 RPM.Optional:- Digital CounterOperation on:- 1/4 hp Motor 220/230V 50 Hz Single Phase main AC.   Spindle Speed RPM                                    20 ± 1 r https://www.shakuntlascientifictraders.co.in/mild-steel-hammer-mill-machine.htm https://www.shakuntlascientifictraders.co.in/mild-steel-hammer-mill-machine.htm Wed, 24 Sep 2025 00:00:00 +0530 Hammer mill used for Coal Minerals and agrregates The Mill Comprises of a Steet Rotor, Carrying Four Steel Hammers Hinged to it, This arrangement is housed in a steel & Cast Iron Chamber with a feed Inlet and Outlet. On the Outlet side, a Mesh fixed so that finder material of the desired size only can pass down. The Coarser Material is carried around and pounded further. The ground material is collected in a cloth sack provided for this purpose. The Maximum fineness possible is 250 mesh, Additional screen of 72 mesh and 100 mesh are also supplied along with the instrument . The mill has a hopper to feed the material. The feed size is 5 mm (maximum) Available in Different Size 150mm / 200 mm / 250 mm / 300 mm Feed Size :- 0.5 x 3.36mm / 0.5 x 4.75mm / 0.5 to 5.60mm / 0.5 to 9.5mm https://www.shakuntlascientifictraders.co.in/mild-steel-color-matching-machine.htm https://www.shakuntlascientifictraders.co.in/mild-steel-color-matching-machine.htm Tue, 13 May 2025 00:00:00 +0530 A seven color matching cabinet is a specialized piece of equipment used for color matching and quality control in a wide variety of industries including textiles, printing, plastics and paints. This type of cabinet usually includes light sources with varying color temperatures, such as daylight, fluorescent, tungsten, UV, and more. Having multiple light sources allows users to evaluate how colors will appear under different lighting conditions and ensures color consistency across different products or batches. Using a color matching cabinet with seven lights can help improve product quality, reduce rejections, and increase customer satisfaction. https://www.shakuntlascientifictraders.co.in/ultra-violet-cabinet.htm https://www.shakuntlascientifictraders.co.in/ultra-violet-cabinet.htm Fri, 11 Apr 2025 00:00:00 +0530 UV sterilizer cabinets are specialized devices designed to disinfect various tools and equipment using ultraviolet (UV) light, particularly UV-C wavelengths. These cabinets are widely used in laboratories, dental practices, and even for household items to ensure a germ-free environment. Key Features of UV Sterilizer Cabinets Disinfection Efficiency: Most UV sterilizer cabinets can eliminate up to 99.9% of harmful microorganisms, including bacteria, viruses, and fungi. For example, a typical cabinet uses two internal UV-C lamps operating at a wavelength of 254 nm for effective sterilization. Safety Mechanisms: Many models are equipped with safety features such as automatic shut-off systems that deactivate the UV light when the door is opened, preventing user exposure to harmful UV radiation. Capacity and Design: These cabinets come in various sizes and designs to accommodate different needs. For instance, some have a capacity of 45 liters and compact dimensions suitable for desktop use. Others are designed specifically for PCR preparation in nucleic acid-free environments. Timer Controls: Users can set timers on these cabinets, typically allowing disinfection cycles ranging from 5 to 30 minutes, depending on the specific model and application. Material and Maintenance: Most cabinets feature stainless steel interiors for easy cleaning and durability. They often come with adjustable racks to organize items efficiently. https://www.shakuntlascientifictraders.co.in/digital-microprocessor-ph-meter.htm https://www.shakuntlascientifictraders.co.in/digital-microprocessor-ph-meter.htm Tue, 13 May 2025 00:00:00 +0530 MICROPROCESSOR BASED PH METER MODEL LT-50 5 POINT CALIBRATION  PARAMEER pH mV Temp. MEter Range ph- 0.00 tp 14.00 pH mv 0-19999.0 mv Temp. 0-100D C Calibration - Auto Manual      https://www.shakuntlascientifictraders.co.in/atago-master-53a-handheld-refractometer.htm https://www.shakuntlascientifictraders.co.in/atago-master-53a-handheld-refractometer.htm Tue, 13 May 2025 00:00:00 +0530   Master M Series: Hand Held Refractometer Model M range 0-33% Atago , Japan Hand Held Refractometer Model 2M range 28-62% Atago , Japan Hand Held Refractometer Model 3M range 58-90% Atago , Japan   Master T Series [ Auto Temperature Compensation]: Hand Held Refratometer Model T range 0-33% Atago , Japan Hand Held Refratometer Model 2T range 28-62% Atago , Japan Hand Held Refratometer Model 3T range 58-90% Atago , Japan Range like 0-53% , 45-82% , 0-10% , 0-20% are avialable in both the models,Prices on Request MASTER H SERIES [ Water Resistant, ATC,Heat Resistant ]Refractometer designed for high temp samples during cooking or boiling Model - 50H Range 0-50% Model - 80H Range 30-80% Model - 93H Range 45-93% Model - 100H Range 60-100%   SUCROSE SOLUTIONS -Standards for RefractometerReference sucrose solution 10% or 20% or 30% of sugarS/MILL-E SERIES - For Salinity of salt water Salinity Refractometer 0-100% Salinity Refractometer ATC-S/Mill-E Range 0-100% Honey Refractometer: Model HHR-2N Range 12.0-30% to determine the % of water contained in honey Atago , Japan Range 12.0-30% to determine the % of water contained in honey 1st Lab Alcohol Refractometer: To check % of alcohol , Indian Digital Refractometers Pal Series: PAL 1 Range 0-53% [ Resolution 0.1% ] 10-75ºC ATC PAL 2 Range 45-93% [ Resolution 0.1% ] 10-75ºC ATC PAL 3 Range 0-93% [ Resolution 0.1% ] 10-75ºCATC PAL-MAPLE 0-85% [ Resolution 0.1% ] 10-75ºC ATC Abbe Refractometers: Model NAR-1T LIQUID Range 1.3000 to 1.7000 with sugar scale 0-95% built in light fourth place by estimation 5 to 50ºC temperature Model NAR-2T for high temperature samples from 0 to 120ºC temperatur Model NAR-3T for precision measurement of the fourth place 5-50ºC temperature Model NAR-4T for high refractive index measurement range 1.4700 to 1.8700   Digital Abbe Refractometers: Model DR-A1 Range 1.3000 to 1.7000 with built in light   Digital Polarimeter: Model POLAX-2L manually operating meter with digital indicator with ATC 18-30ºC https://www.shakuntlascientifictraders.co.in/electric-digital-do-meter.htm https://www.shakuntlascientifictraders.co.in/electric-digital-do-meter.htm Tue, 13 May 2025 00:00:00 +0530 DIGITAL DO METER 3 1/2 DIGIT DED DISPLAY RANGE- 0-20PPM RESOLUTION - 0.1PPM ACCURACY - +_0.2PPM pOWER 220VAC +_0 TEMP COMP. -0-50DC Sensor - Ampero Metric Accessories - Gold / Silver Probe DO Probe Operting Manual Dust Cover   https://www.shakuntlascientifictraders.co.in/digital-tds-meter.htm https://www.shakuntlascientifictraders.co.in/digital-tds-meter.htm Thu, 15 Jan 2026 00:00:00 +0530 DIGITAL TDS METER DISPLAY 3 1/2 DIGIT LED RANGE - 5 RANGE 0-1000 PPT ACCURACY - +_% FS +_ DIGIT TEMPERATURE COMPENSATION - MANUAL 0-50DC CELL CONSTANT ADJUSTMENT- ADJUSTABLE DIGITAL DISPLAY CONDICUCTIVITY / TDS CELL- DIP TYPE POWER- 220 +_ 10% 50 HZ https://www.shakuntlascientifictraders.co.in/polarimeter-device.htm https://www.shakuntlascientifictraders.co.in/polarimeter-device.htm Tue, 13 May 2025 00:00:00 +0530 polarimeter (220) mm with assembly & choke with double shadow effect (accuracy of 0.1 by direct reading) w/o sodium lamp. https://www.shakuntlascientifictraders.co.in/insize-height-gauge.htm https://www.shakuntlascientifictraders.co.in/insize-height-gauge.htm Fri, 11 Apr 2025 00:00:00 +0530 INDIZE DIGITAL HEIGHT GAUGE WITH DRIVE WHEEL  SIZE 0-300MM SIZE 0-600MM   https://www.shakuntlascientifictraders.co.in/portable-aquasol-water-hardness-test-kit.htm https://www.shakuntlascientifictraders.co.in/portable-aquasol-water-hardness-test-kit.htm Tue, 13 May 2025 00:00:00 +0530 Total Hardness Test Kit 2 - 40 & 5 - 100 PPM (Mg/L) AE201,  250TEST Total Hardness Test Kit 2 - 40 & 25 - 500 PPM (Mg/L) AE211  250 TEST Total Hardness Test Kit 5 - 100 & 25 - 500 PPM (Mg/L) AE221  250 TEST Total Hardness Test Kit 1 - 20 & 5 - 100 PPM (Mg/L)  AE231   250 TEST Total Hardness Test Kit 50 - 1000 PPM (Mg/L) AE241 250 TEST Total Hardness Test Kit 2 - 40 & 5 - 100 PPM (Mg/L) AE501  500 TEST Total Hardness Test Kit 2 - 40 & 25 - 500 PPM (Mg/L)  AE511 500 TEST Total Hardness Test Kit 5 - 100 & 25 - 500 PPM (Mg/L) AE521 500 Test Total Hardness Test Kit 1 - 20 & 5 - 100 PPM (Mg/L) AE531 500 Test Total Hardness Test Kit 50 - 1000 PPM (Mg/L) AE 541 500 Test      https://www.shakuntlascientifictraders.co.in/capsule-filling-machine.htm https://www.shakuntlascientifictraders.co.in/capsule-filling-machine.htm Fri, 11 Apr 2025 00:00:00 +0530 Capsule filling machine (100 holes) with one loading plate 0 no. size for 500mg hand oppereted Capsule filling machine (200 holes) with three loading plates 0 no. size for 500mg hand oppereted Capsule filling machine (300 holes) with three loading plates https://www.shakuntlascientifictraders.co.in/bahuchar-automatic-capsule-loader-machine.htm https://www.shakuntlascientifictraders.co.in/bahuchar-automatic-capsule-loader-machine.htm Thu, 24 Jul 2025 00:00:00 +0530 AUTOMATIC CAPSULE LOADER MACHINE GMP MODEL SS304 WITH 300 HOLES LODADING PLATES - 3 NOS.  PER DAY FILLING CAP. 15000-20000 CAPSULE OR ABOVE       https://www.shakuntlascientifictraders.co.in/mx-50-moisture-analyzer.htm https://www.shakuntlascientifictraders.co.in/mx-50-moisture-analyzer.htm Thu, 15 May 2025 00:00:00 +0530 Quick & Easy Measurements 4 Selectable heating modes from standard, quick, step and ramp that help customize heating curves to your unique sample types for accuracy & precision 5 Selectable measurement programs to best fit sample and process with STANDARD, QUICK, AUTOMATIC, TIMER, MANUAL Clear & easy-to-view with the large VFD display means setting values, change in moisture content, action status indicators, and data number are clearly visible Safe & Reliable Design Easy handles & ergonomic design helps to prevent burn injuries while improving workflow movements of samples in and out efficiently Self Check functions such as defect check function along with temperature control checks have you covered Progress window allows easy visibility to see heating process through translucent window Quick Reference Card for convenient operating guide is installed at the bottom of the analyzer Compliant & Traceable Reporting Data Interface is a breeze with RS-232C interface and our WinCT–Moisture software that helps determine measurement conditions as well as optimize time & accuracy Data memory function allows for test results to be stored and recalled or outputted for additional analysis GLP, GMP, GCP and ISO compliant with date/time, ID, calibration data and check record outputs   https://www.shakuntlascientifictraders.co.in/merapal-auto-refractometer.htm https://www.shakuntlascientifictraders.co.in/merapal-auto-refractometer.htm Fri, 11 Apr 2025 00:00:00 +0530 Merapal Atago Refractometer Hand held model https://www.shakuntlascientifictraders.co.in/digital-bomb-calorimeter.htm https://www.shakuntlascientifictraders.co.in/digital-bomb-calorimeter.htm Fri, 11 Apr 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/cod-digester.htm https://www.shakuntlascientifictraders.co.in/cod-digester.htm Wed, 16 Apr 2025 00:00:00 +0530 Designed for digestion of COD test samples and multi-function dry bath heating. Precise temperature control from ambient +5°C to 150°C with ±1°C accuracy User’s self-compensation functions for the temperature to counter for the difference between block temperature andsample temperature. Fitted with MICROPROCESSOR BASED DIGITAL TEMPERATURE INDICATOR-cum-CONTROLLER for auto control withrespect to time and temperature and is also fitted with IN-BUILT BUZER TIMER for AUTO TIME CONTROL to indicatecycle end. Microprocessor Based Digital Temperature Indicator cum-Controller having an individual display for set value andprocess value. Block is made of the specially extruded aluminum block to accommodate 6 OR 15 samples Display: LED with set value (SV) and Process Value (PV) Heater Load: 500W/750W Complete with a glass tube. Tube Cavity: 40mm(Ǿ)x 65mm(D) Glass Tube Size and Condenser Size: Supplied with 6 OR 15 nos. of glass tubes of size 38mm (Ǿ) ×200mm (Length) andSupplied with 6 OR 15 nos. of glass tubes of size 38mm (Ǿ) ×200mm (Length). Sample Size: 20 ml Sensor: RTD (PT-100) Timer (SAD) (Auto Time Control unit): Fitted with AUTOMATIC DIGITAL MINUTE TIMER which starts automatically whenset/desired value of temperature is achieved. When the set time period is over the heaters get switched offautomatically. Buzzer: Alarm for cycle end Power Supply: 220V AC https://www.shakuntlascientifictraders.co.in/gsm-control-valve-system.htm https://www.shakuntlascientifictraders.co.in/gsm-control-valve-system.htm Tue, 13 May 2025 00:00:00 +0530 https://www.shakuntlascientifictraders.co.in/laboratory-polarimeter.htm https://www.shakuntlascientifictraders.co.in/laboratory-polarimeter.htm Fri, 10 Oct 2025 00:00:00 +0530 POLARIMETER (220) MM WITH ASSEMBLY & CHOKE WITH TRIPPLE SHADOW EFFECT (ACCURACY OF 0.01 BY DIRECT READING) W/O SODIUM LAMP. Polarimeter, 22O M. M., Model : RSPT-3 having thefollowing additionaladvantages: 1 . The optics & Tripple field shadow are fabricated from lmported glass and Quartz. Z. The tripple shadow system is better to comprise the field illumination at the time of measurement 3. The International Sugar Scalerangeis higheri.e'- 130to + 130 4. Vernier Micrometer graduations are more to take the reading in more accuracy. i.a Least count ( L.C.) of LS.S.:0.02" and least count (L.C.) of O.R. Scale=0.01